Jump to content
Thuggies

Helix Connected to 2 Separate Power Cab Plus 1x12 - Separate Chain / Path

Recommended Posts

Helix Connected to 2 Separate Power Cab Plus 1x12

 

Can I run a separate cab configurations to each speaker?

 

I can an XLR going out to each.

 

Let me know if you have any ideas or if anyone has done this yet.

 

Thanks all!!

 

Jeff

Share this post


Link to post
Share on other sites

Yes.

 

Use Line 6 Link is the easiest way, and daisy chain the PC+s together. Modify the settings of each PC+ cab independently in HX Edit at the output block (or on the Helix).

Share this post


Link to post
Share on other sites

Hi Waymda - Thanks for the response!

 

This is sans a PC connection, but I could use Edit to configure.

 

Basically, this is the setup:

 

Helix > PowerCab Plus 1x12

          > PowerCab Plus 1x12

 

Within the same patch, I'm just wondering if I can have separate Amp/Cab combos go to each separate 1x12?

Share this post


Link to post
Share on other sites

are you asking about having diffeent speaker settings on each of the two PC+s...then Yes.

If you are asking if you can have two outputs (L&R?) from the helix withdifferent  Cabs in those chains and the PC+s running in FRFR mode...Yes.

 

You could even run two completely seprate chains from one input with diffrent FX and aAmps and cabs etc on each, going to the two PC+s in FRFR mode...

or you could save the bock and run no cabs in the helix as noted above...

Share this post


Link to post
Share on other sites
13 hours ago, Thuggies said:

Hi Waymda - Thanks for the response!

 

This is sans a PC connection, but I could use Edit to configure.

 

Basically, this is the setup:

 

Helix > PowerCab Plus 1x12

          > PowerCab Plus 1x12

 

Within the same patch, I'm just wondering if I can have separate Amp/Cab combos go to each separate 1x12?

 

Think when waymda said 'PC' he was referring to Powercab, not Personal Computer

Share this post


Link to post
Share on other sites

I have 2 PC Plus cabs I use the line 6 Link cable to the first cab and another link cable between the 2 PC plus cabs...... I use the speaker simulations in the power cab

and you can set them to be the same or you can set them to be different speaker types for each preset or each snapshot......

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...