A19suburban96 Posted November 28, 2019 Share Posted November 28, 2019 Like the title says I’m getting no sound out of my Spider V60 amplifier. I usually use the G10 relay which is fully charged. I’ve tried using the relay and a cable along with different guitars. The results are the same no sound. The amp turns on normally and the tap tuner feature works with both the relay and the cable so I know I’m getting a signal into the amp. I’ve had no other issues before now. The amplifier always stays in one place so it’s not like something could have come loose by moving it around. I’m at a loss with this. Any help would be appreciated. thanks Quote Link to comment Share on other sites More sharing options...
A19suburban96 Posted November 29, 2019 Author Share Posted November 29, 2019 After reading other threads with this issue, I gave the reset a try and it worked. I sure hope this isn’t going to be a regular occurrence. Guess I’ll start looking at other more stable amplifiers. Quote Link to comment Share on other sites More sharing options...
karlosfandango38 Posted December 20, 2019 Share Posted December 20, 2019 how do you reset? Quote Link to comment Share on other sites More sharing options...
ADBrown Posted December 20, 2019 Share Posted December 20, 2019 3 hours ago, karlosfandango38 said: how do you reset? Hold down the Home button to access the settings menu. Scroll down with the encoder to where it says Factory Reset. Scroll to the right and press the encoder knob to hit Yes. Note, this will erase any user created or edited presets. Quote Link to comment Share on other sites More sharing options...
renekovacgu Posted January 2, 2020 Share Posted January 2, 2020 I have a similar problem. my Line 6 spider V 30W. There is no sound from the speaker. from the earpiece sound goes. but it only works on hearing aids. the speaker is dead.... I did update the software to version 2.0. I found the Phones mode menu in the setup. when the phone is over and then back to line mode, the sound works. when I turn off the power and then turn on the amp again, the sound doesn't work. it is always necessary to edit phones mode to phone and then to line to make the speaker work. Quote Link to comment Share on other sites More sharing options...
mphegge64 Posted February 2, 2022 Share Posted February 2, 2022 Similar, but get this. I plug in my 2018 PRS SE Pauls Guitar, nothing, not with G10TII or via cable. Plug in my Taylor GTe Acoustic. Works perfectly booth ways. Plugged the PRS into another system and my Audio interface, have a signal and sound. Many cables tried even.....waiting, 2nd day for response from Line 6. Factory rest has been tried Quote Link to comment Share on other sites More sharing options...
mphegge64 Posted February 3, 2022 Share Posted February 3, 2022 Got it works. Seemed to have been a channel issue Quote Link to comment Share on other sites More sharing options...
paulcorreia Posted February 18, 2022 Share Posted February 18, 2022 Any other options to solve this other than Factory Reset? The speakers work. I can connect an iPAD/Laptop and that works. The backing tracks work fine. It's just the guitar input plays no sound. Not even the usual static noise when connecting a cable. I've tried multiple different guitars. Tried different cables too. Nothing. I've updated firmware too. And I've done a factor reset. Anything else I could try? Quote Link to comment Share on other sites More sharing options...
boded Posted August 29, 2022 Share Posted August 29, 2022 Hi, same problem with my Spyder V 60. Moved to a new house. Hadn't used it for more than a year. brought it out to use and - No sound. Tried updates and factory reset, but no luck. Wired or wireless - no sound on any setting. Quote Link to comment Share on other sites More sharing options...
JoeJack2 Posted November 10, 2022 Share Posted November 10, 2022 Hi As above. Spider V 60, no guitar sound. Factory reset several times, updated firmware. Demo and drums work so speaker fine. Anyone find the solution eventually? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.