ron-e-g Posted December 26, 2019 Share Posted December 26, 2019 Hello, I'm having trouble getting a signal from/to my Otari B-3 From/to my UX2. I purchased some 1/4 TRS to XLR both male, and female. I know Otari uses pin 3 hot. However before changing my cables I tried them I was getting loud screeches at times. After changing the pin assignments on the cable TRS Phono ends..I'm still getting feedback in both channels when volume level is raised. Anyone done this successfully? or any advice? Thank You, Ron Quote Link to comment Share on other sites More sharing options...
ron-e-g Posted December 30, 2019 Author Share Posted December 30, 2019 Are these Line inputs balanced or not? Quote Link to comment Share on other sites More sharing options...
ron-e-g Posted December 31, 2019 Author Share Posted December 31, 2019 There is no mention of the line inputs being balanced as it is with the analog outs. Where do I find that information? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted January 6, 2020 Share Posted January 6, 2020 https://line6.com/legacy/toneportux2 Quote Link to comment Share on other sites More sharing options...
psarkissian Posted January 6, 2020 Share Posted January 6, 2020 Single channel balanced, pin-3 is the ground/return according to AES/EBU standard AES-14, which is what we use at Line 6. Quote Link to comment Share on other sites More sharing options...
ron-e-g Posted January 6, 2020 Author Share Posted January 6, 2020 Thanks psarkissian. I couldn't get a TRS to work, however I did get a TS phono to deliver a quiet signal. Wired pin three to tip others ground. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.