Flyers_V88 Posted January 1, 2020 Share Posted January 1, 2020 I unscrewed the bolts on the nameplate and took the Line 6 nameplate off, however, the plastic it's mounted on won't seem to come off? Is it glued to the tolex? I don't see any other screws on the front-end? Anyone know how to fully remove this place so the amp is just all tolex in the grill, without the plastic under the controls? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted January 2, 2020 Share Posted January 2, 2020 If recall, it's all part of the grille frame. I'll check further on that. Quote Link to comment Share on other sites More sharing options...
Flyers_V88 Posted January 2, 2020 Author Share Posted January 2, 2020 4 hours ago, psarkissian said: If recall, it's all part of the grille frame. I'll check further on that. Thanks. Yeah, there's really not much info online. It's either glued on, or is park of the meshing.? Worst case, I could re-tolex the grill. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted January 2, 2020 Share Posted January 2, 2020 Confused regarding Tolex vs Grille cloth. The logo on the Spider Valve series is screw into the grille cloth frame, no Tolex involved. Quote Link to comment Share on other sites More sharing options...
Flyers_V88 Posted January 2, 2020 Author Share Posted January 2, 2020 59 minutes ago, psarkissian said: Confused regarding Tolex vs Grille cloth. The logo on the Spider Valve series is screw into the grille cloth frame, no Tolex involved. Sorry, yes, the grille cloth. I took the plate off the plastic. I want to now remove the plastic brace that sits on top, or is glued to the grille. Can't seem to figure that out. I don't want to rip it off either. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted January 3, 2020 Share Posted January 3, 2020 It's a plastic label mount on a metal bracket, that mounts on the rim of the grille frame. There are foam strips along the edge for good sealing when the frame is mounted. If those seal get damaged, the grille frame will rattle. Best to leave it alone. Quote Link to comment Share on other sites More sharing options...
Flyers_V88 Posted January 3, 2020 Author Share Posted January 3, 2020 4 hours ago, psarkissian said: It's a plastic label mount on a metal bracket, that mounts on the rim of the grille frame. There are foam strips along the edge for good sealing when the frame is mounted. If those seal get damaged, the grille frame will rattle. Best to leave it alone. Yeah, I was worried about potential noise. Only way to safely get rid of it is to re-cloth the entire grill I'm guessing? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted January 3, 2020 Share Posted January 3, 2020 I've pulled the grille and bracket on these, but you have to have the right tools and the right experience. Quote Link to comment Share on other sites More sharing options...
Flyers_V88 Posted January 3, 2020 Author Share Posted January 3, 2020 2 hours ago, psarkissian said: I've pulled the grille and bracket on these, but you have to have the right tools and the right experience. Yeah, I've looked into back, and I can see it's bolted on in various places. I could do it, but too much hassle lol. I'm gonna have the grill re-clothed to look more vintage at some point, I'll have the person take it off then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.