robyone Posted January 27, 2014 Share Posted January 27, 2014 Hi all: i have a dt50 212 and hd500 and for two years all work perfect (many gigs with no problem) from about two months the l6 link stop working. The topology on the amp flash between I and II...no sound, and every action on the pod have no response on the amp and viceversa. Re-flash firmware on both, make global reset on both and pedal calibration on pod...change xlr cable...still no lucky. The two working perfectly alone (no l6link connected) Please, any idea? Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted January 27, 2014 Share Posted January 27, 2014 have you tried holding the topology and pentode switch together when powering on? (pinch them) hold until the lights stop flashing. worth a try if you haven't already. Quote Link to comment Share on other sites More sharing options...
robyone Posted January 27, 2014 Author Share Posted January 27, 2014 yes, i have....factory reset...at this point i really don't now wtf is the problem.... :angry: Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted January 27, 2014 Share Posted January 27, 2014 sounds like there is something midi related going on, do you have any other midi settings on your tones or midi devices plugged in? Quote Link to comment Share on other sites More sharing options...
robyone Posted January 27, 2014 Author Share Posted January 27, 2014 ...no Zap...i have look at midi settings on the pod, but all is at default.... Quote Link to comment Share on other sites More sharing options...
innovine Posted January 27, 2014 Share Posted January 27, 2014 Broken solder joint on one of the sockets? Quote Link to comment Share on other sites More sharing options...
moogary Posted January 27, 2014 Share Posted January 27, 2014 Have you tried replacing the L6Link cable? Quote Link to comment Share on other sites More sharing options...
innovine Posted January 28, 2014 Share Posted January 28, 2014 He said he changed cable in the original post. Quote Link to comment Share on other sites More sharing options...
moogary Posted January 28, 2014 Share Posted January 28, 2014 So he did... XLR not AES, but should make no difference for testing Quote Link to comment Share on other sites More sharing options...
robyone Posted January 28, 2014 Author Share Posted January 28, 2014 yes, bought a new xlr standard cable...nothing to do :angry: today i have open the amp and polish every connection, looking for broken solder joint but everything seems to be ok....i will try tomorrow with tester....very frustrating issue.. thank you guys for the ideas.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.