ValiantGideon Posted May 20, 2013 Share Posted May 20, 2013 How come the "FBS Enable" button is not present on certain channels I've created? It seems that this button is only present on "vocal presets" for my setup but obviously I would think it would be present for input channels such as: acoustic guitar/bass/etc. that I would also want to have FBS for.I'm sure it's a simple fix/answer but cannot find in the FAQ's or on this forum someone having this problem/ignorance that I'm having.thank you in advance :) Quote Link to comment Share on other sites More sharing options...
line6jonb Posted May 20, 2013 Share Posted May 20, 2013 Yes, all vocal presets will have FBS on them, however some instruments will not. Individual drums, for example, do not have FBS on them. Instruments that say direct also will not have FBS, however any instrument that is mic'd or says mic'd will have FBS. Instruments that have amps or cabinets will have FBS on them as well. Instruments that have a 1/4" input in the top right of their icon in the galley - which runs across the bottom or the stage in setup mode will not have FBS, because that 1/4" input is meant as a direct input. Any instruments that have a direct input and are not mic'd will not have FBS - but, again, drums won't have FBS either. FBS can be found in the Tweak mode, in deep tweak, in the input section. I hope this is helpful. Quote Link to comment Share on other sites More sharing options...
ValiantGideon Posted May 21, 2013 Author Share Posted May 21, 2013 That makes since. I didn't even think about the fact that FBS is not needed in direct inputs. Thanks for answering despite my ignorance though! Quote Link to comment Share on other sites More sharing options...
mncanuck Posted May 30, 2013 Share Posted May 30, 2013 So, for acoustic guitars that have a microphone and piezo blended pick-up system, can you choose "mic'd" as an option to enable FBS even though you're using a 1/4" input? Quote Link to comment Share on other sites More sharing options...
dboomer Posted May 30, 2013 Share Posted May 30, 2013 Yes, if you connect it in ch1-12 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.