joetdc Posted February 3, 2020 Share Posted February 3, 2020 Anyone have settings to get a good VH Balance type tone? All I need is the pitch settings. Every patch I have found uses chorus. I know it's done with a detune. Tried smart harmony but there is not much to tweak there. Thanks! Quote Link to comment Share on other sites More sharing options...
bsp212 Posted April 15, 2020 Share Posted April 15, 2020 Set-up is for wet/dry/wet. I’ve got a line level tap off of a speaker output that goes to the hxfx split stereo to a 2 channel power amp. L/R cabinets wet with a center dry cabinet. Detune anywhere between +/- 7-10 cents depending on your taste. I’m running the +/- 10 cents and like the tone for balance era. Also delays on either side, some say 250ms/500ms with one repeat. I’ve found this is a bit much and can get a little muddy so I’m running 180ms/360ms. I’m experimenting with where to put the other effects like phaser/flanger/chorus/echo that Ed uses occasionally. So far I’ve tried running them in front of the amp and in the effects loop. When I get some time I’m going to try to run them in front of the wet cabinets only. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.