fourchimney Posted March 11, 2020 Share Posted March 11, 2020 Greetings Thrill Seekers (with a tip of the hat to TE) My MusicMan guitar has a stereo output with one channel sending the mag pickups and the other sending the piezo pickup. Switching lets you send one or both signals. I have set up a preset so that the mags are coming into the Guitar input on 1A and the piezo is coming in the Aux input on 2A. Both chains go out as Digital using the L6 Link to my new PC 212+. It's great to be able to go from acoustic to searing lead tones with just a flip of a guitar toggle switch and nothing else. What I would like to do is send the mag tones to the PC's #1 amp and Vintage speaker, and the piezo tones to the #2 amp and FRFR speaker. Seems simple enough, however I can't get the Helix to accept two different PC settings at the same time. For instance, when I set the one first digital output block and speaker #1 to vintage, and then set then set the second output block to FRFR, the setting for the top block gets written over and I have two FRFR channels. This seems to be the case with both Helix Edit and the Helix device itself. Helix 2.80.0 PC 2.00.1 I feel like I must be doing something wrong since the 212+ is advertised as having a dual mode where you can split outputs like I want. I imagine there are MIDI-based workarounds but I don't want to go there yet. Is there something I need to set up on the PC? Any help would be appreciated! Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.