merdenoms74 Posted March 18, 2020 Share Posted March 18, 2020 Hi all, I'm trying to get the Helix to change channels and modes on my DSL40 via midi program changes. This works fine if I set up an instant command for a patch, but I want to be able to change channels with snapshots. When I'm in Command Center trying to set the command up to a footswitch, I'm using the following settings: Command- Bank/Prog Midi Ch- 1 (I know this is correct because it works on Ch1 with an instant command) Bank CC00- Off Bank CC32- Off Program- 0,1,2 or 3, depending on the channel/mode I'm trying to get. Again, I know this is correct because it works for an instant command. Should I have specific settings for the Banks? Any help will be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
merdenoms74 Posted March 18, 2020 Author Share Posted March 18, 2020 Okay, so I worked out that when you go into Command Center while in a snapshot, what you see are all the options for that 1 snapshot- not for the entire patch! I really don't understand the way this is set out. Regardless, I have it working now that I realised I can use instant commands because what I'm seeing in Command Center only affects the snapshot that I'm currently on. Quote Link to comment Share on other sites More sharing options...
C4TH Posted March 19, 2020 Share Posted March 19, 2020 I set the (Bank CC00 - off) to CC64. And use that bank for all snapshots. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.