godoq Posted March 26, 2020 Share Posted March 26, 2020 For reference, I have been using the G10 for more than 2 years, And it has been a few weeks since I bought and used the new G10s at a local shop. I loved the simplicity and ease of use of this product. :) However, after the firmware update (Both for the Relay g10s Receiver and Transmitter according to the guidelines of Line6), I found that the battery life was apparently reduced. Only one indicator remains on my G10s receiver before I use it for less than 2 hours from the full battery state - 3 indicator in receiver & solid green transmitter LED. This doesn't seem to be the only case for me. I found several people complaining of the same symptoms here in Forum, Facebook Page, and TGP. If you look at a few support tickets or answers, Line6 may says, "You have a problem with your battery and need to replace it." I would like to hear a clear explanation from Line6, but I guess it will be difficult. There is no notice in Recall Page that the usage time will change after Update. However, Line6 has already changed the description of "8 hours" to "6 hours" on the product page and manual (Partially). (Honestly, I wish I could use it for 6 hours ...) -> Existing users obviously made purchases based on advertisements and specs, but there are no notices, rewards, or countermeasures. If you report this problem, Line6 will probably tell you to create a Support Ticket, and you will be asked to replace the unit because there is a problem with the battery. -> I wonder if the G10T that Line6 will resell is an improved hardware. Maybe that's why Line6 is driving replacements, otherwise people who buy new products will complain a lot. Do you guys have any problems with battery life after firmware update? I can't believe that my unit (Used for a few weeks) suddenly broken after firmware update. 2 3 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.