Jump to content
Sign in to follow this  
tmcbride

Updated to 2.90 Lost All Output/Volume Control

Recommended Posts

Updated my LT to 2.90.  I had backed up (saved)  my presets, and when I loaded them back in after the update, (they worked) except my volume (foot pedal)/output (big knob) control just stopped working on all of them. I would like to do a complete factory reset, and then reload 2.90, but when I read the instructions to do that, it seems I can't because I don't have a foot switch "9" and above which seems to be required to do a full reset. The Helix Floor has the 9-12 buttons, but the LT only goes to 8. How do I reset the LT to be able to load in 2.90 from scratch again? Is it even possible?

Share this post


Link to post
Share on other sites
14 minutes ago, tmcbride said:

Updated my LT to 2.90.  I had backed up (saved)  my presets, and when I loaded them back in after the update, (they worked) except my volume (foot pedal)/output (big knob) control just stopped working on all of them. I would like to do a complete factory reset, and then reload 2.90, but when I read the instructions to do that, it seems I can't because I don't have a foot switch "9" and above which seems to be required to do a full reset. The Helix Floor has the 9-12 buttons, but the LT only goes to 8. How do I reset the LT to be able to load in 2.90 from scratch again? Is it even possible?

 

Here you go Helix homie!

Helix LT has a total of 12 footswitches.

 

Helix Floorboard/LT

 

1. Holding footswitch 5+6 on boot restores Global parameters
2. Holding footswitch 7+8 on boot restores presets and setlists ”THIS WILL OVERWRITE ALL USER PRESETS AND SETLISTS
3. Holding footswitch 8+9 on boot restores presets, setlists, and IRs ”THIS WILL OVERWRITE ALL USER PRESETS AND SETLISTS
4. Holding footswitch 9+10 on boot restores presets, setlists, globals and IRs (restores factory bundle) "THIS WILL OVERWRITE ALL USER PRESETS AND SETLISTS
5. Holding footswitch 10+11 on boot will rebuild your presets in the latest loaded firmware
6. Helix can now restore by clearing only the current preset instead of wiping out all presets. While holding footswitches 11 + 12
7. Helix can now, after firmware 1.06.5, enter update mode manually by holding footswitches 6 + 12

Share this post


Link to post
Share on other sites

Yes, it did, and I had had some corrupted presets that were also fixed. I used Option 1 (foot switches 5 + 6). I works great now, loving 2.9! Thanks!

  • Upvote 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...