RTman8684 Posted May 8, 2020 Share Posted May 8, 2020 First off, I have the original power supply for my PodXT LIVE (that I am the only owner of) and it's 100% functional. I built a power supply from a Weber power transformer that has eight 9vdc 300mA outputs and one 9vac 2A output. I plug the cable I made into the 9vac output on my supply and measure 9.57vac between the pin and barrel so the supply and the cable are good. However, when I plug that cable into the XT Live the unit does not power up. If I plug in the original power supply it works just fine, but when I measure that, it's output is more like 10.5 vac. Any ideas what could be going on? I figured I would ask first before I start tracing through the power section of the XT live to see what's different about my supply. Quote Link to comment Share on other sites More sharing options...
RTman8684 Posted May 9, 2020 Author Share Posted May 9, 2020 Nevermind, it works. No clue why it wouldn't turn on yesterday - I was probably fat-fingering something. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.