off_brand_lego Posted May 9, 2020 Share Posted May 9, 2020 Heya guys, Im having some difficulty connecting a behringer fcb1010 to helix native. I figured out how to change CC messages manually and, for example, if i wanted to bypass a pedal with CC23 then thats no worries, but I cant work out how to hit the same switch to re-engage the pedal. Any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
rd2rk Posted May 9, 2020 Share Posted May 9, 2020 If you're using the stock chip, you need to set BOTH CNT1 and CNT2 to the same CC#, one with a value of 0 and one at 127. See page 11 section 2.5 of the FCB manual. Quote Link to comment Share on other sites More sharing options...
off_brand_lego Posted May 11, 2020 Author Share Posted May 11, 2020 thanks rd2rk! I eventually figured it out and might make a video on programming the stock firmware. Once its going it's great but maaaan is it painful to find a resource that can just give the jist and you're on your way Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.