kamijo Posted February 4, 2014 Share Posted February 4, 2014 I need help in knowing how to connect my guitar, Floor Por Plus pedal and my amp. My amp has the SEND/RECIEVE inputs and I want to use the amp presets inside the Flood Pod Plus as well as distortion and other effects. Thanks. Quote Link to comment Share on other sites More sharing options...
BillBee Posted March 18, 2014 Share Posted March 18, 2014 The simplest way is to use the effects loop (line in -> effects receive) jack and use your amp as a power amp. With the amp off, turn the FPP on, turn the volume way down, and have the volume pedal backed off then turn the amp on - then adjust your volume levels on the FPP. This will help save a mighty blast and pop through your amp. There are other methods - like using your amps pre and looping the FPP. I use the above with a combo at practice as its quick and easy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.