robbieb61 Posted June 10, 2020 Share Posted June 10, 2020 Updated to 2.92 Just realized that my 3 footswitches now refuse to do anything other than change presets. I also only have 2 views. One is the footswitches view with 000, 001, and 002 The other view is the block view showing the blocks in the preset. This kinda sucks for me because I use a MC6 to switch between snapshots and I only used the HX Stomp footswitches to turn on the tuner (FS3) So now I can't access the tuner. :( And yes, I have FS3 assigned to the tuner in Global Settings -> Footswitches Quote Link to comment Share on other sites More sharing options...
MusicLaw Posted June 10, 2020 Share Posted June 10, 2020 Do a Factory Reset. If that fails to get things back to default, do a full reinstall of HX Edit and firmware 2.92. If still no good, open a service ticket and Line 6 Tech support will get you going. Quote Link to comment Share on other sites More sharing options...
robbieb61 Posted June 11, 2020 Author Share Posted June 11, 2020 Thanks MusicLaw, the factory reset did it for the tuner. :) Quote Link to comment Share on other sites More sharing options...
Kramnella Posted January 18, 2022 Share Posted January 18, 2022 Go into 'global settings' by pressing both page < > buttons at the same time then press > go to FS3 and turn until it says TAP/Tunr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.