kevinrojo Posted June 21, 2020 Share Posted June 21, 2020 hi I have a line 6 spider IV + FBV Pedal.The pedal doesn't work when I want to turn the volume up or down. How can I configure that option? Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted June 22, 2020 Share Posted June 22, 2020 Which FBV pedal? Is it currently in Wah mode? If so, you need to step (hard) on the toe of the pedal to switch to Volume mode. Quote Link to comment Share on other sites More sharing options...
kevinrojo Posted June 23, 2020 Author Share Posted June 23, 2020 is an FBV EXPRESS MKll, when i connect it to my line 6 spider IV, the pedal doesn't control the volume, and the "wah" mode doesn't work either. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted June 24, 2020 Share Posted June 24, 2020 Is it possible the Cat 5 cable or the connectors on it have been bent or damaged? The first thing I would do is check with another CAT5 cable. Assume you have had this for a while or bought it used, the cables are unfortunately very fragile. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 15, 2021 Share Posted April 15, 2021 If it's not the cable, then it's an issue with the photo sensor, it will need to be serviced. https://line6.com/find/service_center/ For the authorized service center in your area. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.