ixagr8 Posted February 10, 2014 Share Posted February 10, 2014 I have an older 2.0 Pod that just stopped working. I have no output and the tuner doesn't even register. Suggestions? Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted February 10, 2014 Share Posted February 10, 2014 I have an older 2.0 Pod that just stopped working. I have no output and the tuner doesn't even register. Suggestions? If the tuner isn't registering, the unit may not be receiving any signal at all. Could be either dead cable or dead 1/4" jack on the guitar (usually just a loose solder connection). Try another cable first, if it still doesn't work, then try another guitar. Sometimes it's the simple things... Quote Link to comment Share on other sites More sharing options...
ixagr8 Posted February 11, 2014 Author Share Posted February 11, 2014 Cord=Good Guitar=Good I'm beyond the simple things. There is no input or output signal. Channels function ok. Did a factory reset; pod boots up to "1 A" everytime. Lights are on but nobody's home. No buzzes like cold solder joints or bad ground. I'm thinking it's a factory RMA that's gonna get 'er working again. I appreciate your comments and if you think of anything else, please holler! Thanks! Quote Link to comment Share on other sites More sharing options...
Mr_Arkadin Posted February 11, 2014 Share Posted February 11, 2014 Are you using the original PSU? Quote Link to comment Share on other sites More sharing options...
jaygoast Posted March 9, 2014 Share Posted March 9, 2014 I had the same problem. Make sure your using the correct power supply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.