Jump to content
philmandoo

POD Go calibrate expression pedal?

Recommended Posts

Hi

Been enjoying my Pod Go - I use a second expression pedal when playing live to control the depth and feedback of delays. Is there any way to calibrate the expression pedal? Mine is a Line 6 pedal but it doesn't go all the way "off" if you know what  mean?

I can't find any info on this anywhere.

Cheers

Phil

Share this post


Link to post
Share on other sites

I Phil, 

 

If I understand correctly, it sounds like you are using the Line 6 EX1 Expression pedal which does not have a 'Toe Switch' like the built in expression pedal on POD Go, thus not being able to turn off. It sounds like you would like the ability to turn off the control from the EX1 expression pedal. 

 

To do this with your current settings; Select the delay block > press Page Right/Page Left > select Knob 1 (Bypass/Control) > use Knob 2 to select EXP1 or 2 (opposite of currently used EXP on POD Go) 

 

You will now see Position at 5% on Knob 3 and a Wait time of 300ms on Knob 5. This means that when the expression pedal is at 5% or lower, it will Bypass the effect after 300ms. Although the current settings work great, feel free to move those parameters around for your playing style. Then press the home view button to return to the preset and save. 

 

In addition to this screen, you can also use Knob 1 to select other parameters within the effect block. For example, use Knob 1 to select 'Time' and set the minimum and maximum values for the expression pedal as well as the feedback; so now with the expression pedal moving from Heel to Toe, the Time and Feedback parameters can each shift to any specified setting.

 

 

Cheers!

Nick

Share this post


Link to post
Share on other sites

Nick

Thanks for your reply - my issue is when I push the expression pedal all the way down when looking on the pod go editor it doesn't go to the down position but bottoms out at about 15%. Full forward is correct, but full back isn't all the way home. So if I set mix to 0% when all the way back the pedal never reaches 0, more like%.

So can I calibrate the pedal to establish the range that the Pod Go recognises or do I need to find an expression pedal with a pot on the side to tweak the range?
Cheers

Phil

Share this post


Link to post
Share on other sites

Put the pedal fully down, then set the Pod Go level to 100% (if it's not already there), then ditto for the heel back position, set to 0% (or vice-a-versa if you prefer).  Then save the patch and it should give you the desired result.  If you want to set ranges between 0-100% you do the same thing but set the parameter each end to what you want - great for controlling eg amp or distortion gain eg 15% to 85% (you can even set this with or without a simultaneous volume drop via the expression pedal assignments).  

Share this post


Link to post
Share on other sites
15 minutes ago, tribal5000 said:

can you calibrate toe switch sensitivity? someone please help


There’s no such function, no. What sort of issue are you having?

Share this post


Link to post
Share on other sites

i could of swore that when i got my pod go it had a way to calibrate toe switch sensitivity i updated to new firmware today but i dont think that has anything to do with my problem . but i cant get my exp pedal value to 0 when heel down unless i press real hard i think i need to cut a little off the rubber bumper i dont know

 

Share this post


Link to post
Share on other sites

the exp toe switch works fine my problem is with the heel bumper not going to zero value the rubber bumper randomly pushes my value back up to a random value between 15/21 but am i crazy in thinking that there is a expression pedal calibration menue?

Share this post


Link to post
Share on other sites

i think that you use to be able to hold navigation right button while powering on the unit and that would bring you to diffrent menues one being expression pedal calibration now it brings you to a pure white blank screen? i dont know ...........line  6 please fix this

Share this post


Link to post
Share on other sites
12 hours ago, tribal5000 said:

i think that you use to be able to hold navigation right button while powering on the unit and that would bring you to diffrent menues one being expression pedal calibration now it brings you to a pure white blank screen? i dont know ...........line  6 please fix this

 

That might be a hardware test mode. I'm pretty sure there isn't a calibration page, as the pedal should auto-calibrate whenever you power cycle.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...