linea06 0 Posted February 12, 2014 Hi Guyz. I have a 500x and i'm trying to work my way around the edit software so i can make and save presets to the the hd500x .Im running A Mac mini with Maverics 10.9..Saw a couple of vids but most of them are with windows and when i tried a couple of tips like copying the same patch multiple times it was a no go .. Still don't know how to back up my patches or save them on the 500x!! Advice please or if there is a guide or a thread on this already(which i searched) please point me in the rite direction!! THANX!! Quote Share this post Link to post Share on other sites
LutherDeLorme 4 Posted February 12, 2014 is there a difference between the edit software in a Windows Pc and a Mac? To my knowledge there isn't. So I think all the vids for a Windows Pc also apply to a Mac. If it doesn't work, what is different exactly? Normal behaviour for copying a preset from Editor to Hd500x: select a preset (the preset is yellow then), and press 'selected' on the top left of editor screen (in the send segment). And then the hd500x will sync for a moment. Done, mission accomplished. What exactly goes wrong in your setup? Quote Share this post Link to post Share on other sites
linea06 0 Posted February 12, 2014 is there a difference between the edit software in a Windows Pc and a Mac? To my knowledge there isn't. So I think all the vids for a Windows Pc also apply to a Mac. If it doesn't work, what is different exactly? Normal behaviour for copying a preset from Editor to Hd500x: select a preset (the preset is yellow then), and press 'selected' on the top left of editor screen (in the send segment). And then the hd500x will sync for a moment. Done, mission accomplished. What exactly goes wrong in your setup? image.jpg Well i like to make copies of a patch after I've made it so i can tweak and make several different version of it..watched the vid and it says to press and hold control to do this.. not sure if this is different command on the mac but it doesn't work for me.. the saving part I got.. it's the coping i can get to work..Thanks Quote Share this post Link to post Share on other sites
sonic 7 Posted February 12, 2014 Basic Windows stuff, on the Mac that should be the option-key... I think. Sammy Quote Share this post Link to post Share on other sites
LutherDeLorme 4 Posted February 12, 2014 I just googled it, try the Command key instaed. Command key in Mavericks = Control key in Windows, I think. My source: http://blogs.computerworld.com/mac-os-x/23301/quick-guide-os-x-mavericks-windows-switchers Another way of copying is in setlist mode, just drag the preset to another setlist, it is copied that way. By setlist mode I mean: see number 6 in my first attached picture. Quote Share this post Link to post Share on other sites
linea06 0 Posted February 13, 2014 Thanks ill give it a shot Quote Share this post Link to post Share on other sites