Samdbl Posted August 28, 2020 Share Posted August 28, 2020 I'm needing to put a volume pedal in the middle of the chain plus an external tap/tuner pedal to control tempo and tuner. Can this be done at the same time? Quote Link to comment Share on other sites More sharing options...
lou-kash Posted August 28, 2020 Share Posted August 28, 2020 https://line6.com/data/6/0a020a4010c935bb66a4c0c44f/application/pdf/HX Stomp Manual - English .pdf > pages 41/42 Quote Link to comment Share on other sites More sharing options...
lou-kash Posted August 28, 2020 Share Posted August 28, 2020 10 hours ago, Samdbl said: a volume pedal in the middle of the chain In fact, to save a valuable block slot, you can assign any other block's Level parameter to your expression pedal to serve as a volume pedal instead. Including the Main Output level which is always active. Quote Link to comment Share on other sites More sharing options...
lou-kash Posted August 28, 2020 Share Posted August 28, 2020 And if you don't use a parallel path in your chain, you can have a "blockless" volume pedal in the middle by creating a "fake" parallel path for just the first block(s), route all signal to it and assign the Level parameter of the Mixer "miniblock" to your pedal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.