chrisleestevens Posted February 14, 2014 Share Posted February 14, 2014 Ive been trying to upgrade my JTV 89F to use workbench HD. In the middle of it, it disconnects and say check that wires are connected or something like that. The interface it came with begins to flash red. I pull the battery and reconnect the cord again, Still does the same thing. Any help would be nice. Quote Link to comment Share on other sites More sharing options...
silverhead Posted February 14, 2014 Share Posted February 14, 2014 Make sure you have a cord plugged into the 1/4" jack on the JTV. That is the power switch for the JTV. Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted February 14, 2014 Share Posted February 14, 2014 Ive been trying to upgrade my JTV 89F to use workbench HD. In the middle of it, it disconnects and say check that wires are connected or something like that. The interface it came with begins to flash red. I pull the battery and reconnect the cord again, Still does the same thing. Any help would be nice. Just to be clear, is it that initially everything is connected fine, green lights on the USB interface etc., the download starts, and then the connection craps out? If that's the case, the only suggestion I have is make sure the battery is charged enough. If you can't get a connection in the first place, and you have a cord in the 1/4" jack, then the USB interface may have died. Some have had issues with that. Quote Link to comment Share on other sites More sharing options...
jayson2 Posted February 15, 2014 Share Posted February 15, 2014 Also make sure your volume control is not turned all the way down as it may be going to sleep and powering down the JTV. Cheers, jayson Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.