HX Stomp: Did Expression Pedal Assigments Swap in 3.0?

[guitarboy_02451]

First off, love 3.0. Thanks for all the goodies!
 

I have the Mission Engineering Expression pedal with the toe switch. On 2.9 and below, the WAH Position was always assigned to Expression 1 automatically. Nothing for the end user to do. I would use Expression Pedal 2 to control the  Amp Channel Volume. Normally when I drag a WAH into the chain, I don't have to set anything. The integration between L6 & ME is perfect.

 

Now, I have upgraded to 3.0 and here is what I've found.  I started a new preset, and added my WAH. It assigned Position to Expression Pedal 1 as normal, and FS5 to the toe switch. Perfect! I clicked the toe button, and started pressing the Expression pedal up and down. I could see the parameters on the wah changing 0-100 but it didn't effect the sound.. (no "wah). 

 

What I had to do was manually un-assign Expression Pedal 1 to the WAH, the re-assign it to expression pedal 2. Then to use my amp CH volume, I assigned that to EXP Pedal 1 (which defaults to the WAH). At this point, it works. Luckily I figured it out... but would appear they can add this to the bug list.

 

Patch made in 2.9x

 

Patch made in 3.0

[guitarboy_02451]

Forget everything I said here... Everything. PEBKAC (Problem Exists Between Keyboard and Chair) ERROR!

 

Some how whilst setting up the patch, I must have manually pressed the toe button and started setting things up. Quite honestly I don't know what I did, but I was able to just grab a new preset and start from scratch and it works just fine. 

 

Sorry for the false alarm... don't pour it on... try to be nice... everyone makes mistakes. :)