Jump to content
KtZA

JVM Loop & HX Effects Phase

Recommended Posts

So I've been trying to make the JVM and HX Effects work for a week now with no success. I've got some experience setting up gear and I can't get rid of phasing issues when running the HX Effects through my JVM Loop.

 

The amp has two loops. One series and one programmable series/parallel with a Mix knob. Phasing happens on both (fairly expected from the parallel one).

 

I'm doing the 4 cable method as suggested by the L6 manual using a minimal setup. Guitar - HX 4cm - JVM and have one FX Loop block with a Horizon Gate and a Simple Delay after it.

 

It's not about maxing out the mix on the delay thought I have messed with the mix settings both on the amp and the HX. The phasing is there even with no effects activated and it happens on both loops.

 

The only setup that doesn't create phasing is HX Effects in the Series JVM Loop without the 4 cable method, which sucks because I mostly need it for the front-end effects but Gate/Delay are a must for me in the post section.

 

Surprisingly I didn't experience the problems most people have with this combination. Setting up the channel switching was easy and I've got minimal noise.

 

Anyone of you guys had the same issue and found a fix for it?

Share this post


Link to post
Share on other sites

You didn't mention whether the HX's FX Loop block's mix is set to 100% which it should.

Share this post


Link to post
Share on other sites
5 hours ago, Schmalle said:

You didn't mention whether the HX's FX Loop block's mix is set to 100% which it should.

 

Sorry I forgot to mention that. Yes it is at 100% Mix.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...