audiohitch Posted January 30, 2021 Share Posted January 30, 2021 (edited) Hi, Has anyone else have a problem with an internal Fuse blowing on the Spider valve 212? its Fuse 2 (T500mA) which sits just before the standby switch. cheers all Edited February 1, 2021 by Line6Tony Removed posted schematic Quote Link to comment Share on other sites More sharing options...
psarkissian Posted February 1, 2021 Share Posted February 1, 2021 If it's blowing fuses, then it needs to be serviced by a Line 6 authorized service center. In the UK, that would be E&M Electronics in Milton Keynes. When were the tubes last changed out? Quote Link to comment Share on other sites More sharing options...
Hamilton892 Posted April 19, 2021 Share Posted April 19, 2021 Tore it apart and found cracked solder joints on pin 2 and pin 3 of the power tube socket that had the shorted power tube originally and the second time. Resoldered those two and all other tube socket pins power and preamp. Owner takes it home and 10 minutes it pops the fuse again prepaidcardstatus Quote Link to comment Share on other sites More sharing options...
psarkissian Posted April 19, 2021 Share Posted April 19, 2021 Take it to a Line 6 authorized service center. This is a high voltage hazard, don't do self repair on these. Quote Link to comment Share on other sites More sharing options...
Dorothy12 Posted June 25, 2022 Share Posted June 25, 2022 Check this out, this might help : https://l6c-acdn2.line6.net/data/6/0a060b316ac34f05935d6c78e/application/pdf/Spider/www.myccpay.com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.