Jump to content
petestuff

Variax Jtv69s Workbench Hd Error

Recommended Posts

Hello all,

 

I am the owner of a new JTV69S in shoreline gold-very happy with it.

 

However I cannot get it to show in Workbench HD, it appears to see the guitar, then starts to load the presets and after the first one it immediately gives the error as shown in the attached picture:

One or more presets failed to load from the guitar.

(Code 8000000a)

Operation timed out.

 

post-139486-0-48805800-1393161460_thumb.png

 

Curiously Workbench also shows it as a JTV59 which it isn't.

 

I am connecting via the the supplied USB interface and both lights are on green, using the latest version of all relevant software. Guitar shows up in L6 Monkey just as "Tyler Variax" and is on the latest V2 HD firmware.

 

Using an i5 iMac with OSX Mavericks loaded 10.9.1.

 

The guitar itself seems to work fine on its own.

 

Any clues?

Thanks

Pete

 

Share this post


Link to post
Share on other sites

Just for info, after discussions with L6 tech support and trying several suggestions (using a different USB and CAT5 cable/different computer) it appears my JTV is faulty and I am about to return it for a replacement/repair.

Share this post


Link to post
Share on other sites

Are you sure you have the 2.0 firmware on the guitar? If you have an earlier firmware version, Workbench HD won't work with it.

Share this post


Link to post
Share on other sites

i have the problem similary with my jtv89f.

 

Verify  firewall and antivirus .

 

i have kaspersky 2014 and i resolve a little the problem just one inactivate.

 

i search a solution.

 

i no think then the guitar is the problem because with workbench hd  if i upload all presets on the variax jtv , it's ok.

 

Using an Windows 7 (64 bits pro)

 

Excuse me for my little english, i m french ;-)

Share this post


Link to post
Share on other sites
Hi,
 
I test with a laptop with the same configuration ie windows 7 64bit pro, kaspersky 2014 and downloading the 60/60 on workbench hd,was a success so it does not come from antivirus or firewall.

What is certain is that the technician Line 6 was the same as you have returned the guitar on my side it's not me the guitar that problem!

Share this post


Link to post
Share on other sites

A quick update post for those who who may be interested.

 

The guitar was returned to L6 who replaced the battery module I think.

On return of the guitar it still had the same problem in workbench which was disappointing and starting to make me worry generally about reliability.

I spoke with helpful staff at GuitarGuitar and was persuaded to try a replacement model JTV69S, I was assured they they get very few variax returns with few repairs needed. I am happy to say the replacement guitar works flawlessly and I am really pleased with it, just as a strat copy with its own magnetic pickups it sounds very good and the models do sound convincing to me and more importantly make me want to play more and try new things.

 

Cheers

Pete

Share this post


Link to post
Share on other sites

I had the same problem- I solved it by removing the battery!

 

Incidentally the battery was completely flat, so I will charge it and try again and see if that make any difference. I use my '69 via VDI into my HD500 so the battery never gets used (or does it?) and of course one design flaw (well, I think it is a flaw) is the battery can only be charged OFF the guitar.

Share this post


Link to post
Share on other sites

Battery is not used or even necessary when using the JTV with a pod through the VDI cable.  Lithium batteries often require a separate charger.  Proper charging is critical.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×