Jump to content

Recommended Posts

Hi.

 

I have lust ordered a Pod 2 for recording guitar via an M-Audio Fasttrack ultra 8R into Pro Tools 10.  I have a couple of questions.

 

1.  Is it possible to use the Pod 2 to record bass guitar also?

2.  Do I use a standard jack to jack lead (mono) from the Pod 2 to the Ultra 8R input?

 

Thanks,

 

T

Share this post


Link to post
Share on other sites

You can use it for bass guitar, although there are no specific bass amplifiers.  You might have some success with the "Tube PreAmp" or "Tweed Blues" models.  You can use a standard 1/4" lead.

Share this post


Link to post
Share on other sites

Hi.

 

Further to this................

 

My Pod 2 has arrived.  I have plugged in and checked everything.  It works fine when I plug the headphones in the Pod.  However, when I connect to my M-Audio interface the signal getting through to Pro Tools is really weak, almost inaudible?

 

If I come out from the Pod to an amp it seems fine.  If I plug something else in the same input of the audio interface the channel works fine.

 

So....  Pod output seems OK (works to an amp). Interface input is OK (with any input other than pod).  Checked lead, that is OK.

 

Anyone any ideas why the signal to Pro Tools is so poor?

 

Thanks,

 

Terry 

Share this post


Link to post
Share on other sites

Just to eliminate something simple, have you tried turning the Output level up on the POD 2.0?

Share this post


Link to post
Share on other sites

You could try the headphone out jack into the M-Audio.

I have seen many users use this approach with the Pocket Pods.

 

Are you sending stereo tot he M-Audio?

Share this post


Link to post
Share on other sites

I am using a standard jack to jack guitar lead.  I tried using a stereo jack lead but this did not change anything.

 

If there is a problem with the left output I would need to send the thing back for replacement but I want to check all possibilities first.

Share this post


Link to post
Share on other sites

Sorted.

 

There are other instrument inputs on M-Audio.  Up and running, cheers.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...