themetallikid Posted March 4, 2021 Share Posted March 4, 2021 So Im sending stereo L/R outs from Helix into two separate channels on my mixer. I'm noticing in the metering and channel lights that the Right channel is about 3db louder on the input trim meters. In my headphones it doesnt sound that way, and gauging from the 3.0db boosts I use on some lead presets Id think I'd hear that. I've checked my path 2A>2B split and there is nothing here that indicates why. I have the 2A and 2B outputs hard L/R 100% the last block(s) after my stereo split of the path are just IR blocks. One is set to more of a 57 biting type sound and the other is more of a 121/160 type mic. Am I safe to assume its a bit of the Fletcher effect being the bassier is the 'right' channel that the input is more sensitive to lower frequencies then? Quote Link to comment Share on other sites More sharing options...
ossianott Posted March 4, 2021 Share Posted March 4, 2021 Did you troubleshoot in a DAW with the helix as soundcard recording input 1/2 and watching the meters there? That would effectively bypass all analog stages except input. If the L/R levels are matched there but not when going to your analog mixer something in the analog domain might be pthe problem 1 Quote Link to comment Share on other sites More sharing options...
Schmalle Posted March 4, 2021 Share Posted March 4, 2021 The mic distance influences volume - just like in real life. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.