Guus7181 Posted April 11, 2021 Share Posted April 11, 2021 Due to limited space in my studio I was wondering if I can rotate the Powercab so that it’s standing on the side (vertically). I am afraid however that the heat sink might be designed to be in horizontal position. Has anyone tried this? Quote Link to comment Share on other sites More sharing options...
OmniFace Posted May 3, 2021 Share Posted May 3, 2021 Haven't tried it. Could theoretically overheat, but I assume it would auto shut off in that case. That looks like a PC212+ right? I'm not sure if the PC212+ speakers are tilted outwards slightly to help with stereo imaging, or if they both face straight forward. If they angle, you might get a little weirdness sending half the signal into the floor basically. Probably nothing to worry about though. Quote Link to comment Share on other sites More sharing options...
Guus7181 Posted May 3, 2021 Author Share Posted May 3, 2021 1 hour ago, OmniFace said: Haven't tried it. Could theoretically overheat, but I assume it would auto shut off in that case. That looks like a PC212+ right? I'm not sure if the PC212+ speakers are tilted outwards slightly to help with stereo imaging, or if they both face straight forward. If they angle, you might get a little weirdness sending half the signal into the floor basically. Probably nothing to worry about though. Thanks for the reply OF. I recently got a message from the official Line6 support confirming that it’s safe to do it like this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.