PaulTBaker Posted April 22, 2021 Share Posted April 22, 2021 I have been using a helix lt and dt25 connected by the l6link. Just bought a PC112+. can I connect that to the dt25 using l6link? If not, what is the best way to connect these three so I can get stereo? Also, I have been reading where the pc112+ input light needs to be yellow for optimal input. I know I can boost the input using the helix on each patch (under the settings for the powercab), but is there a global setting for the powercab so i don't have to change each patch (preset)? thanks. Quote Link to comment Share on other sites More sharing options...
phil_m Posted April 22, 2021 Share Posted April 22, 2021 You can connect two Powercabs or two DT amps via L6 Link, but you can’t connect one of each. It’s just a limitation on how L6 Link is implemented on the Helix. You could connect the Powercab via L6 Link and then use a 1/4” cable to send audio to the DT-25 and control it via MIDI. Or you could do the opposite... I guess it just depends on what you want to do. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.