cglaser68 Posted April 29, 2021 Share Posted April 29, 2021 I own a Helix floor and a single Powercab 112+. While I realize I can run stereo to the front of house directly from the Helix, for some heavy DSP patches, I use the powercab to provide the IR/Cab sim (to offload it from the Helix), so my normal signal chain to FOH is: Guitar->Helix->Powercab->FOH. I was wondering if there is anyway to send a stereo signal to the FOH from a single powercab at least for the patches where I'm not using the powercab for IR/Cab sim. I know the powercab doesn't just drop the stereo signal it gets from the Helix because I *CAN* get stereo from the powercab through its USB interface when it's connected to my DAW computer. I'm just wondering if there is a way to get stereo to FOH from it. Quote Link to comment Share on other sites More sharing options...
bobcoss Posted April 30, 2021 Share Posted April 30, 2021 Not going out of the PC+ XLR to the FOH. The stereo signal is in the L6L, but there no practical way of sending that to a board for a stereo signal. Quote Link to comment Share on other sites More sharing options...
bvaladez74 Posted May 12, 2021 Share Posted May 12, 2021 Nope. You'll need two 112 PC's or the 212 model. Quote Link to comment Share on other sites More sharing options...
amsdenj Posted May 15, 2021 Share Posted May 15, 2021 Get the stereo out from Helix, not Powercab in this case. But generally stereo isn’t that useful in live gigging situations unless you’re a solo artist. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.