EXP pedal used as a Volumen for Helix control
I have a problem with my Ernie Ball 25K exp pedal. When I assign it to the EXP out 2 on my Helix Control It controls the volumen alright, but it reaches the max volumen (100%) somewhere around halfway, and then it starts turning the volumen back down to 0%, when I have the pedal all the way down. I have mesaugered the ohm on the out of the EXP pedal, and it maks a linear curve from 0 to 25 K ohm, when I turn it up.
Is there anyway to change the mode, to fix this.
Is there any EXP pedal
Hi, again.
Not sure about your Ernie Ball EXP pedal, although I have seen that thing about the volume at 100% at halfway then going back down to zero. There are many threads on here covering various expression pedals for use with Helix units. Some are really expensive and some are much less - for example the M-Audio EX-P Universal Controller Pedal. I have 2 for my Helix floor and they work just fine with the polarity reversed in the Global Settings. I'm studio based so I'm not sure h
