OmegaSlayer Posted May 26, 2021 Share Posted May 26, 2021 Hi I connected the PodGo to the USB to record with Cubase The device works as input, in fact I record the signal, with good quality, but the problem is that I don't have the guitar signal output from the monitors It works for the rhythm parts, as you just have to be on the click, but for solos it's a problem, as you can't feel the expression I could keep the cables connected to the amp, but the sound is too loud; If I play through the amp I have my presets output signals between -20db and -14db, and the amp volume at 0.5 (80W amp) but with the DAW I need to use at least -2db to have a decent signal I have started recording with Cubase after 6 years, so I don't remember much about the connections Is there something I'm overlooking? Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 26, 2021 Share Posted May 26, 2021 Make sure your monitors are connected to the POD Go outputs. 1 Quote Link to comment Share on other sites More sharing options...
OmegaSlayer Posted May 26, 2021 Author Share Posted May 26, 2021 Geez...that's a lot of rerouting... Thanks anyway Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.