patriot2006 Posted June 4, 2021 Share Posted June 4, 2021 How do you reset the global settings if you are not able to access HX Edit. I just had an issue at home and had to reset. I have an upcoming gig and realized if I needed to do this manually how is it done? I know there is a way but cannot remember the steps. Thanks in advance for any help. Regards, Rich Quote Link to comment Share on other sites More sharing options...
datacommando Posted June 4, 2021 Share Posted June 4, 2021 31 minutes ago, patriot2006 said: How do you reset the global settings if you are not able to access HX Edit. I just had an issue at home and had to reset. I have an upcoming gig and realized if I needed to do this manually how is it done? I know there is a way but cannot remember the steps. Thanks in advance for any help. Regards, Rich Hi Rich, It’s a big help to say what hardware you want to reset - but here ya go - all of them. Reset Options Helix Floor/LT Button Combination Description 2 LED light Fun 3 & 4 Test Mode 5 & 6 Global reset 7 & 8 Reset setlists to factory, Keep IRs 8 & 9 Reset setlists to factory, Clear IRs 9 & 10 Reset setlists to factory, Global reset, Clear IRs 10 & 11 Upgrades existing presets to latest format 11 & 12 Clear current preset 5 & 12 Clear setlists, clear IRs, Return system settings to default 6 & 12 Safe boot mode To use Reset Options: Power off the Helix Hold the desired button combination Power on the Helix Release the button combination Please note: Buttons are numbered from top left to bottom right. Helix Rack Since the rack doesn’t have footswitches, you’ll instead hold down a combination of the 6 encoders that are below the main LCD screen as you’re booting up. Button Combination Description ENC2 & ENC3 Reset globals ENC3 & ENC4 Restore stock presets and setlists ENC4 & ENC5 Restore stock presets, setlists, and IRs ENC5 & ENC6 Reset globals and restore presets, setlists, and IRs (entire factory restore) ENC1 & ENC3 Rebuild all presets ENC1 & ENC5 Clear all presets, setlists, and IRs ENC1 & ENC6 Will enter Update Mode (This feature is only available on firmware v1.06.5 and higher) HX Stomp Button Combination Description All 3 Footswitches Clears all presets/IRs FS1+2 Resets presets and IRs FS 2+3 Factory restore (globals, presets, IRs HX Effects Button Combination Description Holding FS3 + MODE Will clear all Presets and IRs Holding FS4+FS5 Will reset Global Settings Holding FS5+FS6 Will reset Presets only Holding FS6+TAP Will Perform factory restore (reset, Globals, IRs, and Presets) Holding the right arrow ">" Will put the unit in a fail safe update mode. Use this when the HX Effects is in an un-recoverable state Hope this helps/makes sense 1 Quote Link to comment Share on other sites More sharing options...
patriot2006 Posted June 4, 2021 Author Share Posted June 4, 2021 Sorry, it was the HX Stomp. (senior moment). Thanks for the info. 1 Quote Link to comment Share on other sites More sharing options...
codamedia Posted June 4, 2021 Share Posted June 4, 2021 Are we confusing the terms "reset" and "restore" in this thread? HX Edit can RESTORE (from a backup) but doesn't RESET Hardware start procedures can RESET but can't RESTORE! Of course... if you only use the default GLOBAL options then a RESTORE or RESET of the Global Settings can get you to the same result. 1 1 Quote Link to comment Share on other sites More sharing options...
datacommando Posted June 4, 2021 Share Posted June 4, 2021 3 hours ago, codamedia said: Are we confusing the terms "reset" and "restore" in this thread? I wondered about that, but the thread title does say “reset”. Therefore... Oh, no... I forgot to stick in the “get out of jail free” disclaimer - “No guarantees are given or implied, you do this at your own risk. If it doesn’t work, raise a ticket with Customer Support.” I may shorten that to - “be careful what you ask for”. 3 Quote Link to comment Share on other sites More sharing options...
patriot2006 Posted June 7, 2021 Author Share Posted June 7, 2021 I had twice lost the scroll mode which I use to perform. Luckily it has only happened at home. I think my big feet hitting more than one thing at a time. The following allows you to restore the global settings without loosing all your presets. Resetting All Global Settings: Resetting the Global Settings returns them to factory default. Performing this reset does not affect any presets you may have created. 1. From the Global Settings menu, press ACTION. 2. Press Knob 1 (Factory Settings). The following dialog appears: Cancel, OK Factory Settings? 3. Press Knob 3 (OK) Quote Link to comment Share on other sites More sharing options...
datacommando Posted June 8, 2021 Share Posted June 8, 2021 11 hours ago, patriot2006 said: Resetting All Global Settings: Yep, info on pages 7 & 50 - HX Stomp 3.0 Owner’s Manual - Rev C - English. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.