amcfarlin1 Posted June 25, 2021 Share Posted June 25, 2021 I've been having a problem trying to use my Dunlop DVP3 Expression Pedal as a Volume pedal in the effects loop of my HX Effects. The problem is that when the heel is fully down the volume is at 0% (which is how it should be) but then when I push the pedal halfway forward the volume is at 100%, then finally as I continue rocking the DVP3 forward all the way to the toe position the volume goes down to 0%. So I start at 0%, then halfway through it hits 100%, then all the way pressed forward the volume is back down to 0%. Not sure why its doing this. Anyone have ideas how to fix it? Setup Details: From the "EXP" jack on the DVP3 it connects to the Pedal jack (channel 1) on the HX Effects. In HX Edit: Created a Volume Block and assigned Exp Pedal 1 to it. Min Value is set to 0% Max Value is set to 100% Set to "Position" Linear (not logarithmic) Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.