jnthnkslbch Posted August 1, 2021 Share Posted August 1, 2021 Hi guys, my Helix currently still has the 2.3 firmware and since I have never used the HX Edit, I wanted to start with it. Now I see that you have to be careful when updating, otherwise you can break a lot. (from 2.7 to 2.8 e.g.) My question is how best to update from this old version. Is it enough to make a backup before and update to 3.1 right away? Or should I take smaller steps with the critical firmware change, from 2.3 to 2.7, then from 2.7 to 2.8 and then from 2.8 to 3.1? I don't really have a clue and would be happy if someone could give me advice. Thank you! Quote Link to comment Share on other sites More sharing options...
silverhead Posted August 1, 2021 Share Posted August 1, 2021 Here’s the best advice you can get - direct from Line 6 firmware update release notes. Just follow the instructions. Quote Link to comment Share on other sites More sharing options...
Stewartcmiller Posted August 1, 2021 Share Posted August 1, 2021 Take note as mentioned in the release notes that as you are updating from such a low version - the software will appear to update twice. This is normal and I had the same as also updated directly from 2.3. But the software is good at guiding you through the process. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.