HX stomp: Wet track, Dry track, and output to real amp. Possible

[sveinungulven]

Hi everyone!

 

I love to use HX stomp as an audiointerface. I would love to be able to:

1) record track with hx stomp fx

2) a di-track (dry)

3) while also connect an amp as monitor in the room while im recording.

 

Is this possible?

 

 

[PierM]

Yes totally possible. It's on the manual @ page 55, 56 and 57

 

https://line6.com/support/manuals/hxstomp/

 

 

[sveinungulven]

I didnt find that part.. Forget the dry part. I want to record guitar with Hx stomp, hear bass/drums through studio monitors, BUT also hear guitar in an amp in the room. Playing guitar through studio monitors is just not exciting.

[PierM]

Bizarre...

 

...you could send a instr signal to your amp, putting a FX send block just before the amp/cab/ir blocks in the preset. Of course you will skip all effects after that send block, but stuff in front, like compressors, distortion, boost, volume etc, will be there in that send.

Then it's just about setting your DAW to only monitor the backing track through USB 1/2 (or 3/4)**, and record the guitar signal without Live monitoring (this will prevent the guitar to be sent to monitors).

 

**USB 1/2 and 3/4 are bypassing all the blocks in the preset, so they just goes from USB Input to D/A Output (your studio monitors).

 

Depending on your buffer settings, could be you need to compensate the latency in the DAW to keep eveything in sync.

 

It's all in the manual btw. :)

[sveinungulven]

thumbs up