in2bluz Posted January 8, 2022 Share Posted January 8, 2022 (edited) Please help, I have a Helix LT and bent the built-in pedal. I purchased the Mission Engineering EP1-L6 and saw on another post that instructs to plug into the EXP1 port. I don't have a EXP1 port! When I plug in and use the pedal, its only functioning as a volume pedal. I went into HX Edit and right clicked the "position" where I can select EXP Pedal 1 and EXP Pedal 2. Pedal 2 shows Volume, I can see EXP Pedal 1 shows (Pitch wham: Position) EXP Pedal 2 now shows (Multiple 2) but when I adjust the pedal it's still a volume pedal. I am able to get Wah with EXP Pedal 2, but it seems to be a combo of Volume and Wah. Heel position is zero volume The Volume isn't selected. Screen shot attached. I don't see an easy way to make the pedal operate as the pedal 2 Wah. Please help! Thanks in advance. Ron Edited January 8, 2022 by in2bluz added info that I've found Quote Link to comment Share on other sites More sharing options...
datacommando Posted January 9, 2022 Share Posted January 9, 2022 13 hours ago, in2bluz said: I have a Helix LT and bent the built-in pedal Hi, O.K. By default the on board (bent) EXP pedal is set to EXP 1 Volume, and when switched to EXP 2 Wah. To bypass these default settings when you connect an external EXP pedal you need to use the Controller Assign functions. See the Helix LT 3.0 Owner’s Manual - Rev D - English Pages 55 - 57 Controller Assign https://line6.com/data/6/0a020a3f18374611d5dffd3a45/application/pdf/Helix LT 3.0 Owner's Manual - Rev D - English .pdf#page55 Or - HX Edit Pilot’s Guide - Rev S (v3.11) Page 39 - The Bypass/Controller Assign Tab. https://line6.com/data/6/0a020a3f137e660b4f6a285cb7/application/pdf/HX Edit 3.11 Pilot's Guide - English .pdf Even easier, click on the question mark in the lower left window of the HX Edit interface and select "Pilot's Guide" - it's built in. Hope this help/makes sense. You could always try to fix the bend in the onboard pedal. Quote Link to comment Share on other sites More sharing options...
in2bluz Posted January 12, 2022 Author Share Posted January 12, 2022 Thanks, that helps. I was hoping to allow the new pedal to operate on any patch, but doing it one by one is okay. My 6'8" 270lb body bent the built in pedal pretty bad. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.