Dazzer40 Posted January 28, 2022 Share Posted January 28, 2022 I am using my helix stomp for effects only and using it my Tube amps fx loop , Can anyone explain how i route the FX on the Helix stomp, example say i want some of my FX going in the front and some not how do i set this up from inside the helix stomp . Quote Link to comment Share on other sites More sharing options...
Schmalle Posted January 28, 2022 Share Posted January 28, 2022 Search for 4CM or four cable method and you'll find plenty information and instructions on it. 1 Quote Link to comment Share on other sites More sharing options...
datacommando Posted January 28, 2022 Share Posted January 28, 2022 2 hours ago, Dazzer40 said: I am using my helix stomp for effects only and using it my Tube amps fx loop , Can anyone explain how i route the FX on the Helix stomp, example say i want some of my FX going in the front and some not how do i set this up from inside the helix stomp . Hi, You can find a diagram of how to connect your HX Stomp and your amp using the 4 cable method on page 9 of the HX Stomp 3.0 Owner’s Manual - Rev D - English. You should also be able to find an example set-up in the TEMPLATES factory setlist that ships with your hardware. That should put you on the right track. Hope this helps/makes sense. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.