vudicus Posted February 1, 2022 Share Posted February 1, 2022 Can anyone tell me how to get the TAP tempo to actually work on my pod HD? I'm trying to set the speed of the opto tremolo and it's not doing anything. The flashing does change when I tap it, but the sound does not. Any help would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
silverhead Posted February 1, 2022 Share Posted February 1, 2022 Check the Time setting in the tremolo block parameters. Make sure it is set to a note value (responds to the Tap Temp switch) rather than a millisecond (ms) fixed value. Quote Link to comment Share on other sites More sharing options...
vudicus Posted February 3, 2022 Author Share Posted February 3, 2022 On 2/1/2022 at 3:06 PM, silverhead said: Check the Time setting in the tremolo block parameters. Make sure it is set to a note value (responds to the Tap Temp switch) rather than a millisecond (ms) fixed value. Thank you for your reply, much appreciated. Could you tell me how/where I can access the tremolo block parameters so I can make these changes? Quote Link to comment Share on other sites More sharing options...
silverhead Posted February 3, 2022 Share Posted February 3, 2022 I just checked the manual. The parameter is called Speed, not Time. Select the Tremolo block in the signal flow view and the parameters will be visible. Quote Link to comment Share on other sites More sharing options...
vudicus Posted August 29, 2022 Author Share Posted August 29, 2022 When I go into the tremolo settings, this is what comes up (see pic)... The controller options are Off, EXP 1, EXP 2 or Tweak but nothing to let me set it to tap. Not sure where I can change things to note value rather than ms, that info doesn't seem to be accessible. I have a feeling I'm doing something wrong. Quote Link to comment Share on other sites More sharing options...
vudicus Posted August 29, 2022 Author Share Posted August 29, 2022 In the Tempo section of the setup menu, this is all that appears. I can change the sync from preset to global. If I tap the tempo button the BPM on screen changes but it doesn't actually change the tempo. Quote Link to comment Share on other sites More sharing options...
hurghanico Posted August 30, 2022 Share Posted August 30, 2022 On 8/29/2022 at 8:38 PM, vudicus said: If I tap the tempo button the BPM on screen changes but it doesn't actually change the tempo. To actually hear the tempo change, the effect's "tempo sync" must be enabled by choosing a note value from the dedicated menu. If you are not using the editor, directly on the device choose a note value instead of milliseconds for the effect's tempo (or speed) parameter. _______________________________________________________________________________________________________________________________________________________________________ All about POD HD500/X help and useful tips Quote Link to comment Share on other sites More sharing options...
vudicus Posted August 30, 2022 Author Share Posted August 30, 2022 Many thanks for all the help. I connected to the editor and managed to get it sorted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.