Captain-D Posted February 5, 2022 Share Posted February 5, 2022 Hi ! Does anyone know how to control the GOlden boy with the HX? Thank you !! CC #1 – DRIVE ON/OFF (value of 127 = ON /value of 0 = OFF) CC #2 – BOOST ON/OFF (value of 127 = ON /value of 0 = OFF) CC #3 – CLIPPING DIODES (value of 1 = 2x SYMETRICAL DIODES) (value of 2 = 3x ASYMETRICAL DIODES) (value of 3 = 4x SYMETRICAL DIODES) (value of 4 = 2x SYMETRICAL RED LED's) CC #4 – GAIN CYCLE (value of 1 = 25% GAIN) (value of 2 = 50% GAIN) (value of 3 = 75% GAIN) (value of 4 = 100% GAIN) 10/12 CC #5 – BOOST EQ (value of 1 = BRIGHT BOOST) (value of 2 = MID BOOST) (value of 3 = TAILORED BOOST) (value of 4 = FULL BOOST) Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 5, 2022 Share Posted February 5, 2022 Not sure what you're asking. You have the MIDI messages. Assign them in Command Center. If you don't know how to use Command Center RTM for whatever L6 device you're using (helps to know), then come back with specific questions. If you do know how Command Center works, but not MIDI, say so and I'll explain. Also, think about how, EXACTLY, you want your L6 device to control the Golden Boy. Snapshots? Footswitches? I'm always happy to help, but please don't make me do the Carnac the Magnificent routine. :-) 1 1 Quote Link to comment Share on other sites More sharing options...
Captain-D Posted February 6, 2022 Author Share Posted February 6, 2022 hi! Thank you for your answer and sorry for asking the question wrong. i have the golden boy and if you know you can choose from different styles I would like to change the type of overdrive from the HX on Footswitches in snapshot is different? im lost sorry and I saw this video Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 7, 2022 Share Posted February 7, 2022 Sorry, I don't have time to watch YouTube videos. If you read the manual you will learn that: When you load a Preset, it loads the Snapshot saved with the Preset, whichever Snapshot that was, as the DEFAULT Snapshot. When you load a Snapshot it INSTANTLY sends any MIDI messages assigned to the INSTANT COMMANDS (the Lightning bolts). If Snapshot 1 is the default Snapshot AND IF in SS1 (Snapshot 1), Instant Command 1 (IC1) is assigned CC#1 with a Value of 127 AND IF in SS2 IC1 is assigned CC#1 with a Value of 0 THEN when the Preset loads, SS1 will load and IC1 will execute (sends MIDI CC#1 Value 127) which will turn the DRIVE ON. If you then load SS2 it will execute CC1 with the assigned Value of 0, turning OFF the DRIVE. If you then re-load SS1 it will again turn ON the DRIVE. Instant commands execute in order - CC1 then CC2 then CC3 etc. For example - If SS1 (default) IC1 = CC1 Value 127; IC2 = CC#2 Value 0; IC3 = CC#3 Value 1 Then when the Preset loads, DRIVE will be ON; BOOST will be OFF; Clipping Diodes will be 2x SYMETRICAL If you then load SS2 AND If SS2 IC1 = CC1 Value 127; IC2 = CC#2 VALUE 127; IC3 = CC#3 Value 3 Then DRIVE will remain ON; BOOST will be ON; Clipping Diodes will be 4x SYMETRICAL NOTE: If you assign any sort of TOGGLING MIDI Message such as a TOGGLING CC to a FOOTSWITCH, that will also be sent when the preset loads and again when any Snapshot loads. DO NOT assign a TOGGLING CC to a FOOTSWITCH if you are also using that CC in an Instant Command! The result could cause serious brain damage! End of Lesson. Homework: RTM 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.