TimsonVomDach Posted February 19, 2022 Share Posted February 19, 2022 Hey people, got a problem with setting up the wah pedal on my Helix. My target is to set it up like Jonny in this video: Line 6 Helix Wah settings TIPS and TRICKS. - YouTube So for everybody who doesn't want to watch the video: I want to work like my old Bad Horsie 2. Selecting my wah pedal and chosing the Expression Pedal as the bypass switch on 0% (have tried with a little more % but it doesn't work either). Min Position on about 15%. With that setup it should automatically be activatet when I use the pedal and when it comes down to zero again or below the certain value that I choose for the position parameter it should be off. And here's the problem when I set it up like that: The wah is off in the beginning. When I use the expression pedal nothing happens. When I reach my bypass value the wah is turned on. Then I can use it until I hit the bypass value again. Then to activate it again I have to use the pedal and come down to the bypass value and so on and on. Sometimes when I set my wah pedal up again the exact same way it works as it should until I change something. But most of the time it only works as discribed above. Has anybody any tipps for me? Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.