Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Connecting new EMG (passive) pickup to Shuriken


mrmichaelgibson
 Share

Recommended Posts

Hi all!   I am replacing the stock pickup in my Variax Shuriken 250 and am having some issues.

 

I have a brand new EMG H4 (passive pickup).  I also have a connector that has the following:

 

Red & White wires --> soldered together and covered with electrical tape

Green & Bare wires --> soldered together and connected to W7

Black wire --> connected to W10

 

emg.thumb.png.629d7c445031db2fc23bef0a4cd2f02e.png

 

I did this based on the recommendation here in the forums...

 

1625108347_shurikenwiring.png.b9970fc0ac33c154aee232c6d5633dfe.png

 

 

 

solders.thumb.jpg.220cd8a47c6d69707e1084dedcbb7402.jpg

 

It seems to be wired correctly, but I get a VERY low sound out of it.  When I switch on the Variax, the sound is full as expected.  Switching back to the EMG, it gets a very faint sound (almost no output).  I put this new pickup in another guitar to test and it sounds perfect.

 

Can anyone assist in what I may be doing wrong?

 

Thanks!

 

 

 

 

 

Link to comment
Share on other sites

 

Of course right after I post, I figure it out :)

 

So to anyone else looking to do the same, it's well worth it.  The key was the wiring was wrong.  With an EMG H4 (or I would suppose any passive EMG), the wiring for the Shuriken is:

 

Black and white - solder together and tape off (don't connect)

Bare - tape off (don't connect)

Red (hot wire) - solder to W10

Green - solder to W7

 

 

329360608_emgcorrect.thumb.jpg.256883fbbd6302f5fcbeaa75141806f4.jpg

 

 

The key for me was figuring out the the red was the hot wire  (used this diagram for the clue: https://www.emgpickups.com/pub/media/Mageants/h/z/hz_h3_h4_b245_0230-0221rf.pdf)

 

It's sounding amazing.  Much more alive and sounds pretty much like a standard active EMG 81 (which is what I was going for).  So now this guitar really is the best of both worlds - the high output and powerful sound of the EMG and, well, all the rest of the guitars  via the Variax system :)

 

 

A little trouble to get right, but worth it.  

 

Hope this helps someone!

 

 

Link to comment
Share on other sites

On 4/7/2022 at 8:45 AM, psarkissian said:

Double check with the wiring diagrams in the Knowledge Base here

for pick-up wiring of 89/89F guitars.

 

Make certain they work together.

 

 

 Yep, that's the one I used and it looks correct.  If you see any issues with how I wired it for any reason, please let me know.  Thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...