davec69 Posted May 15 Share Posted May 15 Looks like the LCD display on my M20d has died. What are the options for getting this repaired. Does Line 6 still work on the M20d mixer. Can anyone suggest a repair shop near South San Francisco, CA? Also, since the LCD is not working, I cannot access the Info page>WiFi settings on the mixer, to get the security pin. When I try to access the security pin on my one currently connected Ipad, it says it's only accessible from the mixer. Does anyone know a work around for getting the current security pin, when LCD is out? Is there a default pin, after reset? Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 15 Share Posted May 15 I suggest you open a support ticket if you haven’t already. Quote Link to comment Share on other sites More sharing options...
davec69 Posted May 17 Author Share Posted May 17 Done. Ticket created. Thanks. Quote Link to comment Share on other sites More sharing options...
scotterp Posted May 20 Share Posted May 20 I am curious to know if there is a way to reset the pin as well. I have a similar situation, but had a second mixer as a backup. Just haven't gotten back to fixing this one yet. If there is a way to reset, that would be great. Don't feel like trying 9999 possible pins before I hit the right one. On my second mixer, I wrote the PIN on the mixer itself to avoid this in the future! :) Quote Link to comment Share on other sites More sharing options...
davec69 Posted June 1 Author Share Posted June 1 On 5/20/2022 at 2:22 PM, scotterp said: I am curious to know if there is a way to reset the pin as well. I have a similar situation, but had a second mixer as a backup. Just haven't gotten back to fixing this one yet. If there is a way to reset, that would be great. Don't feel like trying 9999 possible pins before I hit the right one. On my second mixer, I wrote the PIN on the mixer itself to avoid this in the future! :) Well, no luck with support. They were going to get back to me regarding the pin code, but nothing to date. Regarding the LCD fix, basically they don't have parts for this mixer. Sad...really. I've owned this mixer since 2012, and there is still nothing that touches it from a product idea standpoint. Unfortunately, the implementation just needed a few more years of development, and that didn't happen. Fortunately, I did find a "Sold for parts" M20D, and was able to get my mixer LCD, up and working again. I am good until the next breakdown. I'll probably buy up a third M20D for additional parts, if I find a good deal on one. Quote Link to comment Share on other sites More sharing options...
silverhead Posted June 1 Share Posted June 1 I agree. I think it’s a shame that Yamaha, after purchasing Line 6, chose to discontinue the L6 branding of digital mixers. Hopefully they have incorporated the better parts of the IP into their own line of digital mixers but I’m not familiar enough with those products to assess that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.