coachz Posted June 26, 2022 Share Posted June 26, 2022 I setup a dynamic split in hx edit and was trying to alternate between a dry hard rock sound on Path A and a reverby thing on Path B. I found the docs for hx edit are backwards for my stomp xl and I had to put reverse ON for the levels above threshold to hit path A and below threshold to hit path B. I also found no matter how I set threshold, attack and decay I could not get it to work musically where I could be chopping power chords and the play slower passages and transition to the reverby path B. I'm open to any ideas as this would be sweet to use. Also is it possible to have more than 1 split on a stomp xl? Thanks! Quote Link to comment Share on other sites More sharing options...
silverhead Posted June 26, 2022 Share Posted June 26, 2022 I don’t have a Stomp XL to test with, but theoretically there are a couple of options. One is to use Snaspshots with different threshold, attack and/or delay values. Another would be to assign any or all of those parameters to a single expression pedal, and vary the Min/Max values of the parameters in an inverse manner, so that some increase while others decrease as you rock the pedal from heel to toe. Experimenting could give you a smooth transition as you adjust with your foot either slowly or quickly. Quote Link to comment Share on other sites More sharing options...
coachz Posted June 26, 2022 Author Share Posted June 26, 2022 Thanks for the reply. I'm aware of the workarounds with snapshots and controller parameters but I was hoping the dynamic splits would work Quote Link to comment Share on other sites More sharing options...
coachz Posted June 27, 2022 Author Share Posted June 27, 2022 Are dynamics splits only good for more similar sounds and styles as opposed to going from a choppy dry distortion Rock pattern to a very smooth legato reverb sound where I'm seeing this problem? Quote Link to comment Share on other sites More sharing options...
theElevators Posted June 27, 2022 Share Posted June 27, 2022 On 6/27/2022 at 10:24 AM, coachz said: Are dynamics splits only good for more similar sounds and styles as opposed to going from a choppy dry distortion Rock pattern to a very smooth legato reverb sound where I'm seeing this problem? Dynamic split's main advantage is to be able to turn yourself down for rhythm, and turn yourself up for lead without pressing anything on the Helix itself. I don't have any use for it at the moment, but if I were on a wireless in some Cirque du Soleil show (lol), I could turn down my volume knob to 5 and have my rhythm sound; turn up the volume knob to 10 and have my lead sound. So something like: dry medium crunch vs. delay + reverb + EQ + existing path. 1 Quote Link to comment Share on other sites More sharing options...
coachz Posted June 27, 2022 Author Share Posted June 27, 2022 That makes a lot of sense. Thanks for the info Quote Link to comment Share on other sites More sharing options...
theElevators Posted June 27, 2022 Share Posted June 27, 2022 On 6/27/2022 at 10:49 AM, coachz said: That makes a lot of sense. Thanks for the info There is one song in my set that has a very sudden solo with a wah-wah that also rapidly ends. So I assigned all my lead sound ingredients to the same EXP 2 that controls the wah-wah using %threshold value. So I have wah, EQ, delay, all engaged when EXP 2 is over 5%. Then when it's less than 5% (pedal at heel position) all of those turn off 1/2 seconds after, and the delay a second later. You can stagger how things get turned off for a more smooth transition. So maybe that's something else you can try. Quote Link to comment Share on other sites More sharing options...
coachz Posted June 27, 2022 Author Share Posted June 27, 2022 Sounds like a very useful feature if I apply it correctly. Thanks again I really appreciate it 1 Quote Link to comment Share on other sites More sharing options...
craiganderton Posted June 28, 2022 Share Posted June 28, 2022 In addition to theElevators' creative suggestions, yet another use is enhancing dynamics - e.g, essentially the same sound for both, but when you play harder, it brings in more brightness (kind of like the way an acoustic guitar sounds brighter when you hit the strings harder). 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.