Path One Not Working?

[zackblake]

For some reason the top path is always silent, regardless of the settings.

 

For instance, if I set path one to "guitar" input and "1/4" output, there is no sound at all.

However, if I set path 2 to the exact same "guitar" input and "1/4" output, the effects on that line work just fine.

 

Has anyone encountered this issue, or is there a common fix for this problem? Even if I set a clean line with no effects, straight input to output, it does not work on path 1 but the same exact settings work perfectly fine on path 2.

 

Thanks

[rd2rk]

Each Path uses one of the two processors.

With a New Preset, no FX in either Path, if Path1 is silent and Path2 works, then I'd have to say that you have a bad Path1 processor.

[theElevators]

On 7/24/2022 at 8:15 PM, zackblake said:

For some reason the top path is always silent, regardless of the settings.

 

For instance, if I set path one to "guitar" input and "1/4" output, there is no sound at all.

However, if I set path 2 to the exact same "guitar" input and "1/4" output, the effects on that line work just fine.

 

Has anyone encountered this issue, or is there a common fix for this problem? Even if I set a clean line with no effects, straight input to output, it does not work on path 1 but the same exact settings work perfectly fine on path 2.

 

Thanks

I'm pretty sure you have a misconfigured preset.  Try a default preset.  You can have the top path going "nowhere", that's why you don't hear anything. 

[rd2rk]

On 7/26/2022 at 11:25 AM, theElevators said:

I'm pretty sure you have a misconfigured preset.  Try a default preset.  You can have the top path going "nowhere", that's why you don't hear anything. 

 

He states that he's setting the Output to 1/4". Unless he's setting the Input on Path 1 and the Output on Path 2 without setting the Path 1 Output to Path 2...

He also states that setting up Path 2 identically to Path 1 works fine, so I don't think that's what's happening.