kingroyal Posted August 24, 2022 Share Posted August 24, 2022 Anyone know how to make MIDI program changes happen from the shortboard to the HD PRO X? I believe that I have it set-up correct in Utility (MIDI channel #1, HD Pro) and MIDI channel #2 for my outboard unit from the desired footswitch on the shortboard. (Everything there is on the correct channel). Back to the HD PRO X and shortboard, footswitches 5-8 are set up for the program changes (where the individual switches are assigned to MIDI #2 and the desired preset). I don't believe that I need to save every preset (but I did that anyway) and finally, when I try the PC, all I get is a change increments of pc 1 to pc 2 to pc 3 etc. from the outboard unit. They were set set up individually for various pc changes. So what gives? Tried to fix this multiple times. The manual doesn't get into troubleshooting this issue. Does anyone want to take a stab at this?... Quote Link to comment Share on other sites More sharing options...
sweetpete Posted August 30, 2022 Share Posted August 30, 2022 See this message thread: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.