OmegaSlayer Posted October 17, 2022 Share Posted October 17, 2022 I need to move snapshots. Or better I need to "erase" snapshot 1 and substitute it with currently is snapshot 2. Is there a way that I didn't manage to figure out using PodGo Edit? Thanks Quote Link to comment Share on other sites More sharing options...
silverhead Posted October 17, 2022 Share Posted October 17, 2022 You don’t mention why you need to do this and perhaps you don’t. If you simply want to have Snapshot 2 rather than 1 active when you recall the preset you just need to SAVE the preset with Snapshot 2 active. Also, see pg 15 of the POD Go Edit manual for copying and pasting snapshots. 1 Quote Link to comment Share on other sites More sharing options...
voxman55 Posted October 17, 2022 Share Posted October 17, 2022 You can't swap snapshots, which is a nuisance. But you can copy a snapshot and paste it over another. But it means if you have all 4 snap slots filled, you'll end up losing one. Be great if Line 6 would fix this and give a swap facility whereby you can swap snaps around. You can do this with the footswitches so there's no reason this can't be done for snaps. 1 Quote Link to comment Share on other sites More sharing options...
OmegaSlayer Posted October 18, 2022 Author Share Posted October 18, 2022 On 10/17/2022 at 2:56 PM, silverhead said: You don’t mention why you need to do this and perhaps you don’t. If you simply want to have Snapshot 2 rather than 1 active when you recall the preset you just need to SAVE the preset with Snapshot 2 active. Also, see pg 15 of the POD Go Edit manual for copying and pasting snapshots. Yeah, you're right, it's a lead guitar tone, snapshot 1 was the rhythm associated with that lead tone, but it's really of no use, so I should always active snaphot 2 after entering the preset Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.