Controlling DT25 with MIDI Maestro

[JoeV]

I have finally gotten around to programming my Singular Sound MIDI Maestro to control my DT25 and give me footpedal access to all eight voicings. It involves two pages of six buttons. Page 1 is:

1 - Just a label (“Clean Amps”)
2 - Deluxe
3 - Tweed
4 - Turn to P2 and select the last dirty amp (Label says “Crunchy Amps”)
5 - Clean Plexi
6 - Clean lead (Deluxe set to “Stun”)

 

Page 2 (accessed by stepping on Button 4) is
1 - Turn to P1 and select the last clean amp (“Clean Amps”)
2 - Mid-gain Plexi
3 - SLO Crunch
4 - Just a label (“Crunchy Amps”)
5 - Boosted JCM800
6 - Big hairy solo

So the left-hand buttons select the amp channel, the other four buttons select the voicings.

 

I kept it simple and did not send EQ or reverb with each voicing, but I have sent Gain/Channel Volume and Boost states to balance volumes across voicings, because the various amps have somewhat different outputs, and a Deluxe with everything on "10" is WAY(!!) too loud.

 

After asking so many questions here, I thought I'd share some actual knowledge.