Jump to content
hifly

Pod Hd500x Usb Fw: 0.00

Recommended Posts

Hello

 

On the setup screen of my HD500X, in Utilities, the USB firmware is 0.00 and my pod can't be connect with my PC.

What can i do ?

 

Excuse me for my English and thanks for your help

 

Sur l'écran setup du HD500X dans utilities, la version USB est 0.00  donc impossible de le connecter au PC

 

Que faire ?

 

Merci de votre aide

Share this post


Link to post
Share on other sites

Have you tried updating the HD500X driver?

 

With your HD500X disconnected, download the driver from here. Select HD500X as the Product and Driver as the Software. Then choose your OS.

http://line6.com/software/

 

After downloading the file, and with the HD500X still disconnected, install the driver on your PC. After the driver has successfully installed, connect your HD500X via USB. The driver will be installed on your HD500X, and you should get a confirmation message from the Windows Device Driver installation wizard.

Share this post


Link to post
Share on other sites

Hello

 

Thanks for your help.

 

I made this way again and again and again, but no issue ...  I think that the USB version is not installed on my Pod because on the setup screen

of the Pod the USB fw: v0.00  (If you press view button until 2 seconds, you enter in the setup of the Pod and you can see Flash memory and USB firmware version )

 

Windows can't dialog with Pod to install the driver because not USB firmware in it

 

If you have an over issue ....  i take it ! ;)

 

Thanks

Share this post


Link to post
Share on other sites

No action .... i connect the pod but nothing ..... in the system controll of windows the driver can't be install it's in error.

 

Thanks

Share this post


Link to post
Share on other sites

When i connect the Pod there are three beeps of USB connection .... and i checked all ports .    always the same ...

 

Thanks for replies,

Share this post


Link to post
Share on other sites

Connected with another PC that's the same ... i think too ... the technical service is the rigth issue. :)

 

Lot of thanks alls ;)

Share this post


Link to post
Share on other sites

on Win7/64 bit  there might be a situation where u wld have to disable driver signature enforcement on every reboot in order for the Line 6 drivers to work...

 

check this atricle on how to do this.

 

the shortcut is 2 'hibernate' or 'sleep' yr computer 2 avoid needing 2 go through this hassle...

  • Upvote 1

Share this post


Link to post
Share on other sites

Mine showed USB firmware 0.00 after the first time I upgraded it, but I was still able to connect to it with Monkey, so I pushed it out again and it showed up correctly after that.

 

I didn't see this in any of your posts, so forgive me if I missed it, but have you tried to connect to the POD using Monkey?

Share this post


Link to post
Share on other sites

Hello,

 

I have installed the drivers many times to reflash my pod hd 500 because it is frozen with the logo line 6...

 

The installation was succesful under the administration access but I still have "drivers" stated as "No" whereas it succeded to install the newer version of drivers.

 

I have disabled the driver signature enforcement but nothing changed... . Thanks

Share this post


Link to post
Share on other sites

just bought pod hd500x yesterday and am having similar issues, esn does not show up in monkey and even though I download drivers and that is sucessful monkey still says they aren't there. also cannot update via usb with monkey at all.

Share this post


Link to post
Share on other sites

I have the same problem and the line 6 support doesn't solve my problem.

 

I have a mac mini (photo). And my HD500X doesn't works with the computer.

 

I can't use the monkey, HD500X edit and the midi driver doesn't recognize too.

 

Anybody knows what's happening?

 

TKS

Captura de Tela 2018-11-05 às 20.04.49.png

Captura de Tela 2018-11-05 às 20.05.34.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...