Please ensure Javascript is enabled for purposes of website accessibility Jump to content

Might be considering a replacement 600 neck?


Recommended Posts

Don't know off-hand. Opening a ticket means that all the support people

will see it and so the right person can chime in.

 

Out here in the forum world, it's too random. A support ticket would put you

with the right people for this.

  • Upvote 1
Link to comment
Share on other sites

Don't know off-hand. Opening a ticket means that all the support people

will see it and so the right person can chime in.

 

Out here in the forum world, it's too random. A support ticket would put you

with the right people for this.

 

Ever since there was a small ding on a fret, I've been having problems trying to fix it out. I made that fret playable again, but it sacrificed having lower action on those strings. 

 

I could probably replace the neck but I thought it played amazingly before, and I kind of like the Variax and Line 6 decals on the headstock to show it's a Variax.

Link to comment
Share on other sites

You can have frets replaced individually.  Just need to get a piece of the proper fret wire.  If you go replacement, I would go with something other than Line6.

 

I would need frets from 10 and up replaced, possibly leveled again to match the old frets.

Link to comment
Share on other sites

a refret is likely in the area of a couple hundred bucks....

you could probably source a used 300 for around that and get a neck and a backup set of electronics...

or a transplant starter set :D

there's probably a few guys around these parts that made transplants and have necks laying around though..

 

I would need frets from 10 and up replaced, possibly leveled again to match the old frets.

  • Upvote 1
Link to comment
Share on other sites

If we do have one here, I'll be the one who'll check it and if needed,

level and dress it.

 

We'll see what there is here. Found one for someone a couple weeks ago.

It wasn't in a handy spot to grab. Have to search and see if there is another.

 

 

600 neck have a laminated fretboard. I don't see anything on the Warmonth site

in their neck section about having any with laminated fretboards.

 

 

  • Upvote 1
Link to comment
Share on other sites

Thanks for all the suggestions. I might try to level my current neck, but it seems hard. I suppose I can live with a different neck if it goes that route though. Anyone know if Warmoth can do a 24 fret strat style maple?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...